Worx WX540 Service Manual download pdf (Page 10)

12V Li-Ion multi-purposed saw EN

1110

OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the

instruction book carefully.

INTENDED USE

The machine is 2 saws in 1 tool with rep saw

and jig saw function, intended for sawing

wood, plastic, metal and building materials

while resting ﬁrmly on the workpiece. It is

suitable for straight and curved cuts.

CHARGING PROCEDURE

1. CHARGING YOUR BATTERY PACK

WARNING!

The charger and battery pack are

speciﬁcally designed to work together so do

not attempt to use any other devices. Never

insert or allow metallic objects into your

charger or battery pack connections because

an electrical failure and hazard will occur.

2. BEFORE USING YOUR CORDLESS

TOOL

Your battery pack is UNCHARGED and you

must charge once before use. When you

charge the new battery or one which has not

been used for long periods of time, it may

not reach full charge until after you have

discharged it fully in use and recharged it

several times.

3.1 HOW TO CHARGE YOUR BATTERY

PACK (WX540 WX540.9) (See Fig. A1)

Connect the battery charger (13) to the power

supply and the green light (14) will illuminate.

Slide the battery pack (12) into the charger

base to make the connections. And the red

light (14) will illuminate to show charging has

started.

After charging approx 3-5 hours, the red light

will switch to green, which means the battery

is full, and charging is completed.

3.2 CHARGING PROCEDURE (WX540.3)

(See Fig. A2)

1) Plug the charger into an appropriate outlet.

The light (a) will be green.

2) Insert the battery pack into the charger, the

To reduce the risk of injury, user

must read instruction manual

Warning

Wear ear protection

Wear eye protection

Wear dust mask

Do not expose to rain or water

Do not burn

Do not dispose of batteries, Return

exhausted batteries to your local

collection or recycling point

This product has been marked with a

symbol relating to removing electric

and electronic waste. This means that

this product shall not be discarded

with household waste but that it shall

be returned to a collection system

which conforms to the European

Directive 2002/96/CE. It will then be

recycled or dismantled in order to

reduce the impact on the environment.

Electric and electronic equipment can

be hazardous for the environment and

for human health since they contain

hazardous substances.

SYMBOLS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Comments to this Manuals

No comments