Worx WG368E Instruction Manual download pdf (Page 12)

Cordless Chain Saw WG368E WG368E.9

provided between the oil ﬁller cap and the

strainer, to prevent leakage ensure machine is

left in a horizontal position (Oil Filler Cap (4)

uppermost) when not in use.

It is important to use only the recommended oil

to avoid damage to the chain saw. Never use

recycled/old oil. Use of non approved oil will

invalidate the warranty.

CHECKING THE AUTOMATIC OILER

Proper functioning of the automatic oiler can be checked

by running the chain saw and pointing the tip of the

Guide Bar (7) towards a piece of cardboard or paper on

the ground.

If an increasing oil pattern develops on the cardboard,

the automatic oiler is operating ﬁne. If there is no

oil pattern, despite a full oil reservoir, contact WORX

customer service agent or WORX approved service

agent.

CAUTION: Do not touch the ground with the

chain. Ensure safety clearance of 30cm.

OPERATION

1. BEFORE USING YOUR CORDLESS TOOL

ATTENTION: The charger and battery pack

are specially designed to work together so

do not attempt to use any other devices. Never

insert or allow metallic objects into your charger

or battery pack connections because of an

electrical failure and hazard will occur.

NOTE: Your battery pack is UNCHARGED and you must

charge once before use.

The battery charger supplied is matched to the Li-Ion

battery installed in the machine. Do not use another

battery charger.

2. CHARGING YOUR BATTERY PACK

The Li-ion battery is protected against deep discharging.

When the battery is empty, the machine is switched off

by means of a protective circuit.

In a warm environment or after heavy use, the battery

pack may become too hot to permit charging. Allow

time for the battery to cool down before recharging.

3. TO REMOVE OR INSTALL BATTERY PACK (See

Fig. G)

Depress the Battery Pack Release Button to remove the

Battery Pack from your tool. After recharging, insert the

Battery Pack into the battery port (See Fig. G). A simple

3-6mm

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

Worx WG368E Instruction Manual Page 12

Comments to this Manuals