Worx WG320 Service Manual download pdf (Page 11)

1110

Cordless Limbing and Trimming Chain Saw EN

1110

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool will

do the job better and safer at the rate for

which it was designed.

b) Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preventive

safety measures reduce the risk of starting

the power tool accidentally.

d) Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any other

condition that may affect the power

tools operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g) Use the power tool, accessories and

tool bits etc., in accordance with

these instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) BATTERY TOOL USE AND CARE

a) Recharge only with the charger

speciﬁed by the manufacturer. A

charger that is suitable for one type of

battery pack may create a risk of ﬁre when

used with another battery pack.

b) Use power tools only with speciﬁcally

designated battery packs. Use of any

other battery packs may create a risk of

injury and ﬁre.

c) When battery pack is not in use, keep

it away from other metal objects, like

paper clips, coins, keys, nails, screws

or other small metal objects, that can

make a connection from one terminal

to another. Shorting the battery terminals

together may cause burns or a ﬁre.

d) Under abusive conditions, liquid

may be ejected from the battery;

avoid contact. If contact accidentally

occurs, ﬂush with water. If liquid

contacts eyes, additionally seek

medical help. Liquid ejected from the

battery may cause irritation or burns.

6) SERVICE

a) Have your power tool serviced by

a qualiﬁed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool is

maintained.

PRODUCT SAFETY

WARNING: When using electric or

battery powered gardening appliances,

basic safety precautions should always be

followed to reduce the risk of ﬁre, electric

shock, and personal injury, including the

following:

WARNING: Read all instructions.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Some dust created by

power sanding, sawing, grinding,

drilling and other construction activities

contains chemicals known to the state of

California to cause cancer, birth defects or

other reproductive harm. Some examples of

these chemicals are:

• Leadfromlead-basedpaints;

•

Crystalline silica from bricks and cement and

other masonry products and

• Arsenicandchromiumfromchemically-

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 57 58

Comments to this Manuals

No comments