Worx WG209 Service Manual download pdf (Page 6)

Hedge trimmer EN

76

with your ﬁnger on the switch or energizing

power tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotating

part of the power tool may result in personal

injury.

e) Do not overreach. Keep proper

footing and balance at all times. This

enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewelry. Keep your hair,

clothing and gloves away from

moving parts. Loose clothes, jewelry or

long hair can be caught in moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used. Use

of dust collection can reduce dust-related

hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool will do

the job better and safer at the rate for which

it was designed.

b) Do not use the power tool if the

switch does not turn it on and off. Any

power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preventive

safety measures reduce the risk of starting

the power tool accidentally.

d) Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tools operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc., in accordance with

these instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by

a qualiﬁed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool is

maintained.

HEDGE TRIMMER SAFETY

WARNINGS

1. Keep all parts of the body away from

the cutter blade. Do not remove

cut material or hold material to be

cut when blades are moving. Make

sure the switch is off when clearing

jammed material. Blades coast after

turn off. A moment of inattention while

operating the hedge trimmer may result in

serious personal injury.

2. Carry the hedge trimmer by the

handle with the cutter blade stopped.

When transporting or storing the

hedge trimmer always ﬁt the cutting

device cover. Proper handling of the

hedge trimmer will reduce possible personal

injury from the cutter blades.

3. Hold the power tool by insulated

gripping surfaces only, because the

cutter blade may contact hidden

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Comments to this Manuals

No comments