Worx WG212 Owner's Manual download pdf (Page 5)

 

WARNING: Some dust created by power

sanding, sawing, grinding, drilling and

other construction activities contains chemicals

known to the state of California to cause cancer,

birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and

other masonry products and

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemical: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to ﬁlter out microscopic particles.

WARNING: This product maybe contains

lead, phthalate or other chemicals known

to the State of California to cause cancer, birth

defects and other reproductive harm. Please

wash your hands after use.





WARNING Read all safety warnings

and instructions. Failure to follow the

warnings and instructions may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for

future reference.

The term power tool in the warnings refers to

your electric (corded) power tool or battery-

operated (cordless) power tool.

1. WORK AREA SAFETY

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in

explosive atmospheres, such as in the

presence of ﬂammable liquids, gases

or dust. Power tools create sparks which

may ignite the dust or fumes.

c) Keep children and bystanders

away while operating a power tool.

Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

a) Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with grounded power tools. Unmodiﬁed

plugs and matching outlets will reduce risk of

electric shock.

b) Avoid body contact with grounded

surfaces such as pipes, radiators,

ranges and refrigerators. There is an

increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or

wet conditions. Water entering a power

tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use

the cord for carrying, pulling or

unplugging the power tool. Keep cord

away from heat, oil, sharp edges or

moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected

supply. Use of an RCD reduces the risk of

electric shock.

3. PERSONAL SAFETY

a) Stay alert, watch what you are

doing and use common sense when

operating a power tool. Do not use

a power tool while you are tired or

under the inﬂuence of drugs, alcohol

or medication. A moment of inattention

while operating power tools may result in

serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position

before connecting to power source

1 2 3 4 5 6 7 8 9 10 ... 21 22

Comments to this Manuals

No comments

Worx WG212 Owner's Manual Page 5

Comments to this Manuals