Worx WX646 Specifications download pdf (Page 10)

Palm sander WX646 WX646.1

triangular base.

2) Replace triangular base by fastening the detail

sanding attachment to base position.

3) Fix it by 5 screws.

4) Similar process is conducted when detail sanding

attachment is changed to triangular base.

7. ATTACH SANDING SHEETS AND PADS

(See Fig. E)

This sander features an easy hook and loop accessory

fastening system for quick changing without clamps.

1) Unplug the sander.

2) Carefully center the sanding sheet (A) or pad over

the base (3/4) to be used. Line up the tip of the sanding

sheet (B) or pad with the tip of the base (C).

3) Press the sheet or pad ﬁrmly in place.

4) To remove sheet or pad, simply pull it off.

WARNING: Failure to unplug the sander could

result in accidental starting causing possible

serious personal injury.

8. SANDING WITH EITHER BASE (See Fig. F)

Always hold the sander as shown in Fig F.

Move the sander in long, sweeping strokes across the

sanding surface. Light pressure is needed for sanding,

polishing and scrubbing. Let the sander do the work.

Always check your work. This sander removes material

quickly.

IMPORTANT: Applying excessive pressure will slow

the sander and produce unsatisfactory results.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Worx WX646 Specifications Page 10