PALM SANDER WU645 WU645.1ORIGINAL INSTRUCTIONSSAFETY AND OPERATING MANUAL
10(See Fig. D). To refit the bag, firmly push the mounting bracket into the location on the sander housing (See Fig. E). For best performance always
11Start your sander before sanding and turn off only after stopping sanding. For best results sand wood in the direction of the grit.Do not start sand
12Plug replacement (UK & Ireland only)If you need to replace the fitted plug then follow the instructions below.IMPORTANTThe wires in the mains lea
13EC DECLARATION OF CONFORMITYWe, Positec Power Tools (Europe) Ltd, PO Box 152, Leeds, LS10 9DS, UKDeclare that the product,Description WORX Palm san
Copyright © 2012, Positec. All Rights Reserved.2PPS02PPK11013A0
212General power tool safety warnings Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may res
3the power tool may result in personal injury.e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the p
4891011121314Only use accessories in good condition. Do not use torn or worn accessories.Do not use a damaged plug or cord, if damaged have them repai
5Component list123456789On-Off SwitchHand Grip AreaSanding Paper ClampClamp LeverClamp Lever LockDust BagPaper PunchBase PlateHook And Loop System (On
6Technical dataType WU645 WU645.1 (645~649-designation of machinery, representative of Palm Sander)WU645 WU645.1Voltage 220-240V~50/60HzPower input 2
7Helping to minimise your vibration exposure risk.ALWAYS use sharp chisels, drills and bladesMaintain this tool in accordance with these instructions
8123Operating instructions Note: Before using the tool, read the instruction book carefully.INTENDED USEThe machine is intended for dry sanding of woo
9and secured underneath both Locked Clamps (3). This will ensure safe and efficient sanding performance.CHANGING HOOK & LOOP SANDING PAPER(ONLY FOR
Comments to this Manuals